Electronic Waterblock with 2 sensors

Electronic Waterblock with 2 sensors, prevents serious flooding, should faults occur in the washing and dishwasher or other similar installations connected to the water mains.

It is important that the sensor with the two metal rings is placed where you want to monitor for water leakage.

The new electronic waterblock closes the water when the sensor comes in contact with water. Never any water damage. Battery (AA) included, must be changed every 3 years.

Electronic Waterblock can be used either on a cold water or a hot water tap (up to 70 ° C). The valve housing is made of polyamide 6.6 and reinforced with 30% fiberglass, very heat resistant.

Another advantage of this material over metal is that it does not rust. The manufacturer (DuPont) has confirmed this material anti-toxic.
Energy supply: One Alkali battery LR6 - 1.5V (Mignon)

Tip: Use only quality batteries - good experience has been shown with batteries from the following manufacturers: Philips, Varta, Energizer and Duracell.

data:

• Water pressure (maximum) 1.0 MPa = 10 bar (tested up to 15 bar)
• Valve fjord 3/4 ind thread
• Valve socket 3/4 ind thread
• 3/4 ″ access
• 3/4 gang departure

Watch video

Electronic Waterblock prevents serious flooding if faults are encountered in the washing and dishwasher or other similar installations connected to the water mains.
Exceptional article for American refrigerators, water cooler washing machines and dishwashers. Mounted vertically or horizontally between the tap valve Ballofix and the machine's connection hose. If leakage occurs in the machine or on hose, EWB prevents a quantity of water that is larger than the amount you have set it through. This avoids permanent leakage. Connection is with 3/4 "inside and 3/4 external thread.

The battery AA 1.5v must be changed as a minimum every 2-3 years